Arducam B0205 1080P Day & Night Vision USB Camera Case
Description
This is a case for the [Arducam 1080P Day & Night Vision USB Camera Module](https://www.arducam.com/product/b0205-arducam-1080p-day-night-vision-usb-camera-module-for-computer-2mp-automatic-ir-cut-switching-all-day-image-usb2-0-webcam-board-with-ir-leds/) (SKU: B0205) which is great for Octoprint if you don't want to use a ribbon cable. It's made out of 3 parts and requires no supports to print. It comes with a GoPro-compatible mount that also works great with the [Modular Mounting System Arms](https://www.thingiverse.com/thing:4861050). You can remix this design using the STEP files in the downloads section or directly [edit in Onshape](https://cad.onshape.com/documents/5d21837a02fea82748379a24/w/7c24e439a51abf0e7635428d/e/8559ebd3d975a8d85a00ac6d). ### Required Hardware - 4 x M2x20mm screws (longer works too but it will stick out the back) - 4 x M2 hex nuts ### Print Settings Use any material such as PLA. There isn't much heat coming from the camera. Use 2 or 3 perimeters and about 15% infill. 0.2mm layer height is fine. Orient the parts as shown below.  ### Post Printing & Assembly Using a 5mm drill bit, clean out the holes for the infra red LEDs if necessary. Use a 2mm drill bit to clean out the screw holes if necessary. Assemble the parts according to the exploded view below. Be careful when threading the LEDs through the holes. 
Statistics
Likes
8
Downloads
0