Backfire G2 Nose/Tail Guard
Description
Nose or Tail guard for Backfire G2 boards. Material and settings used: - TPE. - 30mm/s for perimeter and infill. - No support - 80% Infill. - 0.2mm layer height. - 205° nozzle, 60° bed (Magnetic build plate, stuck well without adding glue). - Got best results when printed as show in 1st image (upside down). Attached to the board using BlueTac. Seems to work well for now. Its what I had on hand, feel free to improvise.
Statistics
Likes
1
Downloads
0