All Sky Camera Enclosure
Description
This is an actively-cooled enclosure for housing an All Sky camera running - [Thomas Jacquin's software](https://github.com/thomasjacquin/allsky). It can be equipped with a high quality camera module, a Raspberry Pi Zero, and a 30mm 5v fan. To enable remote focusing, consider installing the following [remote software](https://github.com/eat-sleep-code/camera.remote). ## Getting Started ### You will need the following non-included parts: * (1) - Raspberry Pi Zero WH * (1) - Micro SD card (Sandisk preferred) * (1) - USB to Micro-USB cable of appropriate length (do not exceed 25'). This will be used to deliver power to the Raspberry Pi Zero WH. * (1) - Raspberry Pi HQ Camera (with tripod mount removed) * (1) - [StarDot 1.55mm lens](https://smile.amazon.com/gp/product/B01CX4U7DK) * (1) - [JMX 4 Inch Acrylic Indoor/Outdoor Clear Camera Dome](https://www.amazon.com/gp/product/B012OL8HZ2) * (1) - [30mm x 30mm **5-volt** Fan](https://smile.amazon.com/gp/product/B072FW3DDQ) * (1) - [Set of assorted M2.5 Cap Head Screws](https://smile.amazon.com/gp/product/B07VG889RW) * (1) - [Set of M3, M4, M5 Cap Head Screws](https://smile.amazon.com/gp/product/B07Q24FV8T) ### You may need the following additional tools: * [Metric tap set](https://smile.amazon.com/gp/B07FG1MJND) * Needle nose pliers * Xacto Knife (for cleaning up small imperfections in prints) * WD-40 (for lubricating threads of fasteners)
Statistics
Likes
20
Downloads
0