Artist-D Standard PSU cover
Description
Note: I missed the rear screws for the cover, you can drill and tap them if you like but they are not needed, I will update the design next itme I open up the machine. PSU cover and LM2596 holder I wanted to make the standard PSU quieter so desaigned a more open fan slot on the PSU with more cut outs for air, I also modified my case to ensure optiumum airflow. You can use any 60mm fan including the original, I used a 12v fan so needed a Buck Converter, this is an LM2596 and I have included the design for the simple holder to make sure it doesn't short out. I used a Noctua NF-A6x25FLX and I would say you don't want a fan any bigger than 60mm and max 25mm thick.
Statistics
Likes
5
Downloads
0