iPAD Mini, Version 4 & 5, Kneepad Holder with fan cooling
Description
In general aviation, iPad Mini based electronic flight bags (EFB) are extremely prevalent. However, iPads are known to overheat in the cockpit. The kneeboard presented provides forced air cooling to the back of the iPad while allowing it to be secured to the pilot's leg. Please note, this design is for only versions 4 and 5 of the iPad mini. Older versions of the iPad mini have a different thickness and will not fit in this design. The EAA article on construction can be found here: http://inspire.eaa.org/2021/10/14/building-a-cooling-ipad-mini-kneeboard/?mkt_tok=OTEwLVNFVS0wNzMAAAGAH7hyeIjAGxbvlqCT1PZHmzv37XBUH0mHCE2Sec57H06MzwjVWqGy5sriL0U7zo-XVryZ9ikYCeqMVkYnopTyhSCUM5V2BhAh6alhz69a8Q Design criteria: - Cooling is provided by 2, 40mm square by 10mm high axial fans with ducted cooling air - Power for the fans and iPad Mini supplied by a single USB connection - Kneeboard should be small - Kneeboard should be comfortable when strapped to the leg - Kneeboard should be buildable at a minimal expense The complete kneeboard requires 1 of each: kneeboard top, bottom and ejector be printed and 2 strap holders to be printed.
Statistics
Likes
9
Downloads
0