Mini ITX Case
Description
More creations, like : https://www.facebook.com/ecauxInformatique 2 Kg PLA max with 0.2 to 0.4 layer height to print this pc, use support only for very hard location (75+ °) printing time : 4 to 10 days for common printers , print the case front side on the bed with good adhésion spray . (print 2 SSD:hdd support) . Infill for Motherboard support : 100% Infill for feet : 100% Infill for Case : 25 - 60 % Needed : - a very well adjusted 3D printer (300x300x400 minimum) - pci-e Riser (100-150 mm max) (not a 90°) - screw (8), you can use anything you want that fit with it ( i used M4/M5 screw ) - 92mm fan + 120mm fan - Mini ITX motherboard - standard graphics card ( up to 250 mm long average ) I used a GTX 2060 gaming Z - i used a 16mm interruptor you can find on aliexpress for exemple (https://fr.aliexpress.com/item/1005001604210551.html) - SFX power supplie FOR PERSONNAL USE ONLY ! this is a work in progress model, it could change and it could have some little defaults. You do not have the permission to : Sold it remix it share it EU only: You can buy one here : https://www.ebay.fr/itm/154433198756 or here : https://www.etsy.com/fr/listing/1047118528 thank you for your comprehension Rev. 2.0 : - reinforcement of the feet - replacing fan support to a simple cache to easy access the inside of the case, better looking . - U can now print the motherboard support as 1 full part - many other corrections and improvements ! Rev 2.1 : - reinforcement of the feet - Many 3D model corrections...
Statistics
Likes
12
Downloads
0