Sortimo L-Boxx Mini Inset
Description
### Customizable L-Boxx Mini Insets, stackable. Default outer walls are 1.2mm and inner walls just 0.8 - for small parts more than enough. ~100g per ½ height inset. Haven't had the use for a full height inset yet (and deeper boxes make it harder to pick parts). By default with rounded edges inside to pick small parts easier. For insets with tool trays like on the photo just delete walls. ### Top Lid Cover Even if you print a 3x2 top tray, you'll need a cover for the lid (as the original dividers are taller). Only if you have bulky parts you may not need one. You can print a transparent cover (can be thinner than 2mm) or lasercut one to avoid mixup of smaller parts. I used 2mm acrylic sheets and glued them to the handle covers with 3M PET (9088). ### Regular "small" Printers The regular print itself is 237.5mm wide, so not optimal for smaller printers. The last actions (last sketch + extrusions + separation) in Fusion are for splitted bodies (~120x150mm print area + skirt/brim), just drag the slider around. If you print the HALF version, be sure to print one mirrored at least for the top as the lid has non symmetric teeth.
Statistics
Likes
123
Downloads
0