Tamiya TT-02 RWD Drift Steering Angle Mod
Description
# Tamiya TT-02 RWD Drift Steering Angle Mod ## Introduction Want to drift your Tamiya TT-02 but don't want to pay a crazy amount for a drift conversion kit? Look no further. This replaces the stock steering arms for arms that will give much more angle than stock. I don't think this will work with the front driveshafts still installed. ## Instructions: * Remove the front driveshafts * Cut the steering stops from the front hubs and the upper/lower control arms * Press in the ball sockets into the steering rods (much like you did when building the kit) * NOTE: Ideally you would use turnbuckles, however, for the sake of a fully 3D printed mod the included rods will work * Install the new steering arms using the stock hardware * Ensure your steering endpoints are set in your transmitter to avoid overstressing the parts * Enjoy your new drifting experience!
Statistics
Likes
13
Downloads
0