Custom Hornady AP Press - Primer Bottle Holder for workbench
Description
This is a simple design I made because Hornady didn't provide anything to hold the spent primer bottle that hangs under the Hornady AP LNL Press. This will possibly work for other brands but this was intended for the Hornady primer bottle. Uses two screws to mount against workbench and to prevent the mount from rotating. Could also use double-sided tape/velcro/or any other temporary adhesive mounting. *Important* when mounting, have the press in the up position so that the tube is extended to it's max so that there is enough tube for the press to cycle without issues. The print is a little loose so that the bottle can move a little if it needs to but you can scale down by 1% to tighten it up.
Statistics
Likes
4
Downloads
0