Magnetic Headphone Under Desk Hanger
Description
I needed a headphone hanger to keep my headphones off my desk. Most hangers I could find on here were either too complex, didn't fit my desk, or required drilling a hole. My desk has a very short lip and the metal frame prevented me from fitting most hangers. So I decided to design my own. This is simple to print, no supports required and any material can be used. You will need 8x 20x10x1 magnets. You can use less, but the holding force will be reduced. Just print and push the magnets into the holes. I tested these with my HyperX Cloud Alpha headphones and it works like a charm. These are around 300g in weight, but with the 8 magnets, it will work with heavier loads (test at your own risk). BOM: Magnets 8x: https://www.aliexpress.com/item/1005001996877841.html
Statistics
Likes
2
Downloads
0