3DR Solo extended Battery Housing
Description
This is an extended battery housing for the 3D Solo drone for folks that want to just replace the dead cells with a modified Gens Ace Tattu 5200mAh 14.8v battery. You will need to pull the lens, BMS and LED board from the old housing and install it in the new one. I used E-6000 adhesive as The case can be pried apart and cleaned then re-glued. E-6000 is rubbery when dry and can be pulled of, but strong enough to hold the case together. This is can be a dangerous project to attempt check out Solo Battery Mod for Dummies (Rev) (1).pdf in the files section of JB's 3DR Solo Owners Group. .Skp file included
Statistics
Likes
4
Downloads
0