Stock or SKR E3 Mini Ender 5 Electronics Enclosure
Description
As impressed as I was with LiveFromNewYawk's design, I could tell that while usable for an Ender 5, this design was definitely designed for an Ender 3. So, I set about to designing it with an Ender 5 in mind by flipping the boards and ports around, so now all the cables came out on the left side and the microSD card and all the ports are on the right side. I also changed the top panel so it screws in from the top, not from the inside. That way, if you ever need access to any of the electronics, you can just take the top off rather than flipping the entire thing upside down and taking off the bottom. In addition, I have made are an optional double mofset mount and improved the PSU mounting. Hopefully, this encompasses everything you may need NOTE: I have yet to print and use this. Hopefully everything works as intended, but unfortunately theres no way of knowing until its been used. Will update with improvements if necessary after I have printed it out
Statistics
Likes
3
Downloads
0