Fpv Antenna 90 degree support holder
Description
I wanted something to hold my antenna in place at a 90 degree bend while flying my mini talon and this works perfect for me. You can use up to 4mm thick diameter antenna, but it will be a tight fit. I printed both the parts with 4 bottom layers and 4 top layers at 205 degrees hot end temp. You can print this lid with this and either glue or use tape to hold this lid on the holder. Update: made some adjustments to the design. Made it slightly longer and made it so it can hold and secure onto the connector. The lid V2 that goes with this, can be printed upside down to eliminate the need for supports.
Statistics
Likes
0
Downloads
0