QIDI X-PLUS Heated Bed Cable Stay or Guide
Description
QIDI heated bed connectors seem to have a habit of falling off. This cable stay prevents stress on the soldered connections on the heater pad. It is zip tied to the frame under the bed (3.6 x 150mm cable tie), after tilting to hook the lip at the back. If the black cable clamp on the base of the X-PLUS is flipped around, the cable can then flex to the left, rather than flexing backwards and hitting the frame. The heated bed cable is then zip tied to the stay at the back. (can use whatever size, I used a couple of 2.5 x 100mm ties). Then bend the cable a bit so it flexes the direction you want, and done!
Statistics
Likes
9
Downloads
0