Squirrel Cage Fan for Dehumidifier
Description
I designed this on Fusion 360 from Scratch. I printed it with SUNLU carbon Fiber PLA, and AMZ3D PLA I used %90 flow since I am printing %100 infill and noticed over extrusion when laying down multiple layers at %100 Flow but you may not need to do that. I am using a steel nozzle, so I increased print temperature to 240, but looks like anything from 220-240 would work, I wanted good bonding of layers on fins. I printed in Dynamic Quality of 0.16 mm layer height. I used a bed temperature of 70, but I think 60 will work. I used tree supports.
Statistics
Likes
0
Downloads
0