Air Flow Improvement Barriers for Lenovo P53
Description
This is a cooling improvement for the Lenovo P53 mobile workstation. Its a quick and simple design. The two cooling fans tend to suck in the air from the sides just below the hot air outlet, therefore a lot of air just circulates, which is not participating in cooling the system. The barriers will block the airflow from the hot air exhaust to the air inlet. The front will be lifted up by about 4 mm by the Stands, allowing fresh air flow below the system. All parts need to be glued to the system, the stands will be glued on the original rubber stands. Instant adhesive does a fine job here. The original design of the P53 is slightly tilted to the front, lifting the front up will make the top and keyboard plain be horizontal. You need to print two of the Lenovo-P53-Stands.STL for the front part. I recommend printing all parts with TPU to avoid scratches and get a proper grip on the desk, but this is up to you.
Statistics
Likes
8
Downloads
0