MultiGP Drone racing gate corner folding collapsible 1" PVC
Description
**This is a work in progress and any updates in files will be posted along with old files being deleted** These are collapsible MultiGP gate corners designed to be used with 1" PVC pipe. Other designs available on Thingiverse were breaking from impacts and wind for a double gate configuration. Try printing out the pivot piece first and stop the print within the first 30 minutes to test it on a piece of PVC to see if you need to scale the model up or down. No support needed. Maximum angle is just over 45 degrees so most printers should be able to make this. Maximum height is 120mm of the doublegate_vertical piece. In addition to this print you will need: Qty 1 - M5 x 60mm cap screw Qty 1 - M5 lock nut w/washers or flange head (8mm head so these are the same as prop nuts) For double gates: Print 1 of each - Doublegate_vertical 1in - Pivot 1in Single gates: Coming soon
Statistics
Likes
1
Downloads
0