Folding Dice Tower Base
Description
This is in addition to the folding dice tower that was created by wuerfel (https://www.thingiverse.com/thing:3981931) This fits the tower into a small dice tray and I used 2 sets of 2mmx5mmx20mm magnets to give it a small hold while not being too aggressive. I made no changes to his model, but on the 2mm foam i cut two small part out for the magnets on the tower itself for the magnets to hold onto. I lined the bottom of the tray with the same 2mm foam just to keep the clacking down to a minimum. The extra piece on the print is a representation of the magnet used to cut the holes out. You can use them as fill if you don't want the magnets.
Statistics
Likes
0
Downloads
0