Brackets for led matrix
Description
This bracket fits the [64x32 RGB LED Matrix - 6mm pitch](https://www.adafruit.com/product/2276) from Adafruit. I am using this display with an [Adafruit Matrix Portal](https://www.adafruit.com/product/4745), but wanted to move the board further inside and needed a harness to hold it while connecting it to the HUB 75 plug using [jumper wires](https://smile.amazon.com/Elegoo-EL-CP-004-Multicolored-Breadboard-arduino/dp/B01EV70C78/ref=pd_sbs_1?pd_rd_w=VCvAo&pf_rd_p=2419a049-62bf-452e-b0d0-ca5b7e35a7b4&pf_rd_r=Q2HE935KPQS32PKH8ZBT&pd_rd_r=f78c02c9-5f40-421d-bb21-1b7b724c5086&pd_rd_wg=2rhGP&pd_rd_i=B01EV70C78&psc=1). [Adafruit Matrix Portal - CircuitPython Powered Internet Display](https://www.adafruit.com/product/4745) I will be hanging it on the wall to replace my existing kitchen clock. 8 x M3 10mm screws are required to connect the brackets to the display. In order to protect and diffuse the LEDs, I ordered the Black LED Diffusion Acrylic Panel from [tapplastics.com](https://www.tapplastics.com) Dimensions: 385mm x 190mm x 13mm / 15.2” x 7.5” x 0.5” I used simple black electric tape to secure the acrylic to the front face. The [OnShape](https://onshape.com) project used to generate these STLs is [available here](https://cad.onshape.com/documents/953180e31ba60af4133e9fe2/w/20c4288c43ab9a7818067a0e/e/a7793e8bf65426e9d0588a6d).
Statistics
Likes
1
Downloads
0