Renault Twingo (2014-) storage under rearseats
Description
I designed this for my 2021 Renault Twingo ZE, which originally wasn't equipped with a Flexicase storage under the rearseats. Since this model has not been changed from 2014 till today I guess this print should fit. Here's what you need: - 2x Outer part (L+R) - 2x middle part (L+R) - 2x Suitable storage net ("ProPlus 302x169mm" - with 5 mounting holes each) - 10x M4x16mm screw (I recommend black DIN912) - 10x M4 nut (I recommend self-locking DIN985) - 2x M4 wide washer (DIN 9021) or suitable piece of metal --> For mounting the net to the printed parts - 6x M5x16 flat head screw (I recommend black plastic screws with flat head like used in automotive applications) - 6x M5 wing nut or knurled nut (alternative may be normal nut+washer; I recommend using plastic nuts and mounting without tools) - Optional: Pieces of soft foam rubber stripes between metal parts of the car and the plastic parts (leaves you some tolerances and reduces the stress on the plastic parts) --> For mounting the assembly to the car (3 holes should be already there) Since the outer part is quite long and should be printed upward I designed a second version which is easier to place and shorter. However I recommend printing upward (see pic) so the part gets a better look and a better stability.
Statistics
Likes
1
Downloads
0