Nespresso Dolce Gusto capsule holder
Description
#Customizable Dolce Gusto capsules stand ##Description This is a customizable stand for Dolce Gusto capsules. I designed it to be low profile but you can choose how many and which modules to use to customize its size. ##Parts to print For each 'level', you need : * plate.stl (x1) : ~40 minutes * bar_long.stl (x4) : ~20 minutes Total print time : ~1 hour For each angle, you need : * angle_long.stl (x1) : ~20 minutes * angle_medium.stl (x2) : ~20 minutes * angle_short.stl (x1) : ~5 minutes For the end part, you need : * end_plate.stl (x1) : ~1 hour * bar_short.stl (x4) : ~5 minutes ##Assembly Glue is not required but I recommend using some to secure everything. 1. Print all the elements you need for each part (angle, 'level' or end) 2. Put the bars in each hole 3. Assemble each part <br> <br> #Print settings ##Quality * 0.2mm layer height * 10% infill * 50mm/sec print speed ##Supports * Without supports * No raft
Statistics
Likes
13
Downloads
0