Apple TV Remote Case - v2
Description
My second iteration of apple tv remote case, with different grip pattern and other slight changes. Print with Flex, PLA or PETG. I highly recommend Flex filament with this case for a softer touch. Print instructions For STL files Make sure you use correct print orientation with the charge port cut out facing the print bed. Correct print orientation is shown in pictures. I used a brim for better adhesion to print bed. I used variable layer height with 0.1 at parts with overhang/curvature and 0.2 at the rest of the model. Print without any support, it is not needed. Good luck!
Statistics
Likes
3
Downloads
0