RPI Compute Module 4 (Pi CM4) utility box
Description
This is intended to be an outdoor utility box for the Raspberry Pi Compute Module 4 (CM4) and various accessories, depending on the project. Lots of extra hooks to allow you to go nuts with zip ties. I use it with a CM4, Waveshare CM4 POE board (same dimensions and screw locations as a standard RPI CM4 board) along with an Airspy R2 (ADSB) receiver, a FlightAware ADSB/UAT receiver, and a couple LNA/Filters via POE power. There's a mount for a 40mm fan on the bottom left, slanted (to keep moisture out) vents on top sides, and holes for ethernet and antenna cables on the bottom left and right near the back. The CM4 board can be mounted on the screw mounts which go all the way through to the back (screw + nut mounting support). The front cover screws on similarly. It's configured with lots of tolerance headroom for easy but solid fit. CAUTION - the dimensions of this stl require a print bed capable of printing up to 249mm wide on the X axis, 206mm on the Y axis (e.g. Prusa MK3S). Reducing size would make this box's CM4 mount not compatible with the CM4 board footprint.
Statistics
Likes
2
Downloads
0