Kingroon KP3S mounting frame for SKR 1.3/1.4 board and StepDown-Converter
Description
This is a mounting frame for a SKR 1.3 (1.4) board (and a step down converter) in a Kingroon KP3S The adapter doesn't need and new holes. It sits on top of the existing screw mount posts of the original board and display. It provides mount posts for a SKR 1.3/1.4 (probably also 2.0) board and a standard StepDown converter (to provide lower voltage for a silent board fan in my case) The hole of the touchscreen is only partially covered with a 6mm gap that allows cables to go through. Also there are some mount holes for M3 screws to screw something on top (in my case a RaspberryPi 3A+ connected via UART to the SKR board) Also have a look at my other KP3S designs: Mini 12864 LCD case for KP3S: https://www.thingiverse.com/thing:4871310 KP3S base plate: https://www.thingiverse.com/thing:4851430 OpenSCAD file attached, feel free to modify If you like this my design, please like it and post a make.
Statistics
Likes
10
Downloads
0