Electric Skateboard Pulleys for Cloudwheels using 3mm bolts (36T 13T)
Description
Specifically designed to fit 120mm cloudwheels, as I wasn't having any luck getting other designs to fit properly with these wheels. Designed around 3x40mm bolts because it was all I had. I might make another version with larger bolts, but honestly, these hold up great. Printed with Nylon. PETG will also work fine, in fact, might actually be better because of the whole moisture thing. I wouldn't use PLA, because I've had PLA pulleys melt due to friction alone. You will need: * 12 x 3x40mm bolts (3 on each wheel works fine too) * 12 x 3mm nuts * (Optional) 2x flanged skateboard bearings. Adds extra stability and keeps it centered. For reference, the belts I'm using are HTD 250-5M, and the trucks are Calibers taken from a Gen I Boosted Stealth. (PETG @ 70% infill) tested so far about 150km and still going. Showing minor signs of wear.
Statistics
Likes
4
Downloads
0