Voxelab Aquila Dual Extruder Mods - Mounting Plate, Filament Guide, & Spool Holder
Description
Just a simple plate that allows you to mount a second stepper motor on the X Axis, behind the existing stepper and extruder, thus allowing for Dual Color Printing. Requires some drilling of 2 5mm holes. Mounting Plate Requires: -Stepper Motor -Extruder -Stepper & Extruder Screws -2 x 3mm x 10mm Screws (or Longer) -2 x 5mm x 10mm Screws (or Longer if not tapping holes) -2 x Nuts for 3mm Screws -2 x Nuts for 5mm Screws ______________________________________________________________ Spool Holder Requires: -2 5mm x 10mm Screws -2 5mm T Shaped Spin Lock Nuts for Extruded Alum -2 3mm x 5mm (or longer) screws for retaining ring. (This could be glued on, or anything used to hold it in place including wire) _______________________________________________________________ Filament Guide Requires: -608ZZ Bearing -1 5mm x 15mm screw (or longer) -1 5mm nut for screw -2 3mm x 10mm Screws for mounting -2 3mm nuts for mounting.
Statistics
Likes
2
Downloads
0