Banana connector holders
Description
Many power supplies, breadboards, and various other lab equipment often have standard banana connectors. Made holders to keep pair of banana plugs exactly together, modeled after DANIU P1036: https://www.banggood.com/DANIU-P1036-5Pcs-1M-4mm-Banana-to-Banana-Plug-Test-Cable-Lead-for-Multimeter-Tester-5-Colors-p-1237898.html?rmmds=myorder&cur_warehouse=CN I think other leads will fit as well, but this one is tested and confirmed to fit perfectly (usually just press fit is enough). They have caps (just in case I want to plug one side 24/7 into a PSU and do not want to get it shorted), it's held by a magnet (hole is 6x3.5mm so 5mmx3mm will fit just fine with a bit of super glue) and these magnets are on the sides as well, so the leads can be organized on some metal case (or frame, or rack). The orientation of magnets can be made in such a way that both sides of the same lead will attract each other and you could pair a bunch of leads together with fewer risks of tangling between the pairs. Spiral cable organizer can be used to keep both leads together so they will not separate and tangle between other leads: https://www.banggood.com/Bakeey-10m-Length-8-or-12mm-Diameter-Cable-Wire-Wrap-Organizer-Spiral-Tube-Cable-Winder-Cord-Protector-Flexible-Management-Wire-Storage-Pipe-p-1765338.html?cur_warehouse=CN&ID=510655&rmmds=search Even I was thinking the distance is standardized, it's often different, so I made few various sizes for few types of connectors I could think. If you need any other sizes, feel free to request them in the comments, or use the attached parametric source files. Couple of them in action: https://youtu.be/SYjbWPPuJl8
Statistics
Likes
6
Downloads
0