Dremel Drill Press - Splitted Holder Model 395 et al
Description
Made my changes to awesome Drill Press - Thanks for the STEP-File: - Splitted the Tool Holder in two parts, because the original holder was to high for my printer. Fixed with a M6 threaded rod (2x M6 Nuts) - so this is very stable! - Made a "universal" hole plate on the tool-holder, in order to change the tools (eg. solder iron for brass nuts). There are a few M4 holes in order to mount different tools. - Changed the top cap to get the rod through, as well as changed the cable mount. no support needed! - Made a holder for my DREMEL 395 (lower and upper holder) and a Nut to secure it from below (2x M4 Nut & DIN912 M4x50 for the crimp and 2x M4 Nut & M4x20 for mount on the tool holder plate) - Made a simple stopper to set the drill depth (1x M5 Nut & DIN931 M5x40/45) - Made a cap for the 22mm rod - Used the base from this remix - thanks for the design: https://www.thingiverse.com/thing:4609373 - Clamp for the pipe was too loose, so I simply used some duck tape to fix the problem. - Printed everything in PLA (0.6 nozzle) with 5 perimeters and 5 top/bottom layers --> rock solid - Happy Printing!
Statistics
Likes
3
Downloads
0