Emax Goggles to Field Monitor Case
Description
Hope you like the project! if this helps you and you feel like sending a donation Id to be happy to accept Dogecoin from you :) DUJ2qsoLvNzbBSmBChVfgwB3tbwibWkt2X Do you have a pair of old Emax goggles laying around collecting dust after you finally upgraded away from them? Well, look no further because here is a good way to recycle them into a new life! This little case will let you use all the original screws and parts to build a field monitor perfect for your little siblings or spotter to join the fun with. All you need to put this together is the original Emax teleporter goggles, a screwdriver, and of course your 3D printer. no soldering or any funky business! ~~====Assembly!! ====~~ You will need to slide the screen into the large front-facing slot so the black screen faces out. Once the screen is in place you will then take its orange ribbon cable and make sure it is slotted into the receiver's underside screen connector. once in place push the black sides inward to lock it down. Now carefully alight the receiver PCB with the two holes in the case and screw it down making sure the DC jack faces upward. Alight the flat plate with the top of the screen to protect the ribbon cable and keep the screen in place. Slot the original battery case into place so the charger port is face down. Lock it down with the printed bracket. NICE! Now you have a functional field display plug the battery into the top DC jack and pass it around to share the FPV fun!
Statistics
Likes
5
Downloads
0