100x150 mm Filter Holder for Walimex 14mm f2.8
Description
Simple mount for square filters (100*150mm) for the Samyang/Walimex/Rokinon 14mm f.2.8 lens. Settings: Resolution: 0.2 mm Infill: 15 % No supports needed Print with round side on the printbed. If fit on the lens is too tight, place the mount on the hotbed with the round side. Heat the bed to 110°C and after a few minutes press the mount on the lens. This should lead to a smoother fit.
Statistics
Likes
3
Downloads
0