HobbyKing EFX replacement prop spinner
Description
I Broke Mine On The Maiden Flight And Hk Never Stocks Them. This Is Essentially A Copy With A Few Improvements. -Slots In Cone For Venting, Not The Ugly Tip Cut Off Like The Original -Better Shaped, Tighter Fitting Cutout For The Propeller -Better Webbing On Base From Center To Outer (Original Had A Large Slot Hole That Made It Weak). Multiple Holes Instead Of Slot Hole *Note: I Have Not Tested To Ensure Enough Airflow Will Get To The Motor To Prevent It Burning Up. I Intend To Do So At My Earliest Opportunity. *The Most Trouble I'M Had Thus Far Is Getting The 2 Screws In Without Ripping Off The Bosses. I Am Thinking About Making The Screw Depth Shorter By Thickening The Material The Go Through On The Cone. Also, There May Be Other Ways To Strengthen The 2 Bosses I'M Not Aware Of... *2/17/2015: Revved Both, I Beefed Up The Screw Bosses, Thickened The Web On The Cone, And Enlarged The Screw Holes By 0.009 *2/18/2015: I Am Planning To Do A 4 Screw Version Of This To Better Seat The Cone Against The Base *3/16/2015: Updated/Revved Both Parts For Better Fit To One Another.
Statistics
Likes
59
Downloads
0