Ares Stoner M4 Adapter
Description
M4 magazine adapter for Ares Stoner Will not work with other brand of Stoner You will need to print the latch and pin from the original file for the adapter. You will need the latch, latch spring and pin from original magazine. (Or use something to make the fit tighter and cram it into place, like me.) Printer: PETG 235 nozzle, 70 plate, 50mm/s speed, 1.7mm/s retraction, infill 25% Time is around 6 hours depending on your support type. Print it upside down with supports on.
Statistics
Likes
2
Downloads
0