Pi1541io Heavy Duty Case
Description
In the original case made by Vokgear the Pi would reach 50-60° Celsius when doing heavy disk emulation work such as disk duplication. This allows for cooling vented from the bottom across the CPU. This also covers any unnecessary ports to keep air flowing to the CPU. These changes cut the CPU temperature down to 40° Celsius. This case includes: - A legend on the front of the case to tell you which each button does - Separate mount for the OLED screen since each manufacturer tends to have different board dimensions. The included washers are used to keep mount in place. - Fan hole made for a standard 30x30 fan - A case top choice for either 2mm knurled nuts or 2mm threaded screws - Dropped any legally used names or trademarks from the case To install the fan you will need to wire up 5v/GND. I cut 2x male Dupont connector lead and attached it to Pins 4 (5v) and 6 (GND) of the hat. This worked well for my needs.
Statistics
Likes
2
Downloads
0