2-part Bobbin 9033P (Pfaff) for FFF printing
Description
Little update: use some superglue even if you seem to have a good press fit. The thread pressure can cause it to come loose from the other half. 2-part bobbin design that can be assembled with either a press fit or a drop of glue. Several tolerances are available, the number behind the name represents the tolerance on ONE side of the diameter. Meaning that a tolerance of 0.1 is in actuality 0.2 mm bigger or smaller than what it must fit into. 9033P bobbin for my Pfaff Hobbymatic 807 Should be compatible with Pfaff Sewing Machine Models 90, 91, 92, 93, 94, 95, 96, 97, 130, 138, 229, 230, 234, 238, 259, 260, 261, 262, 284, 285, 285-1, 294, 295, 295-1, 296, 296-1, 297, 297-1, 300E, 331, 332, 333, 335, 360, 362, 368, 437, 438, 439, 463, 480, 801, 803, 806, 807, 809, 875, 876, 900, 904, 905, 906, 907, 916, 917, 919, 919-1, 927, 933, 935, 939, 946, 947, 953, 955, 975, 1000, 1011, 1013, 1014, 1015, 1018, 1019, 1027, 1029, 1035, 1037, 1047, 1050, 1051, 1067, 1069, 1071, 1100, 1147, 1150, 115
Statistics
Likes
0
Downloads
0