Straight Hole Drilling Jig
Description
<b>Updated!</b> <i>Adapter is now fixed in the opposite direction to avoid that it loosens during drilling. If you choose to print the bushings you may have to fiddle with your printer settings. The bushing outer diameter now has a clearance of 0.15mm to the fixture.</i> I made this for my Bosch cordless drill, to be used to drill holes perpendicular to a surface, I decided to make it more universal by using an adaptor to fit the cordless drills to the fixture. It should be easy to adapt to models from other manufacturers, by modifying the included adaptor STEP file. Please share if you make another adapter :-) Designed for commonly used 8mm steel rods and bushings in 3D printers. Iit might not be necessary to use expensive linear bushings or bearings. You can instead print the included bushing. If you don't have a pair of springs lying around, then this type could be used: https://www.industrial-springs.com/c04200422500s A big thanks to Jeff Osborne who modelled the Bosch cordless drill. https://grabcad.com/library/bosch-flexiclick-drill-driver-system-1
Statistics
Likes
68
Downloads
0