Nozzle Wrench for 3d printers - Supportless
Description
Wrench for standard 6mm nozzle, no supports required and fast print! It comes in two pieces: the wrech itself and a pin. Just put the pin inside a standard wrench socket and fit all inside the printed body, hammering if needed! I printed mine at 0.32mm height using a 0.6 nozzle just to print it faster. The pin's short side is 6.5mm and the socket's diameter for the wrench is 11.5mm so make sure your wrench fit the printed body.
Statistics
Likes
3
Downloads
0