Mounting parts for flower and leafes wind wheel
Description
Hi, This are just some additional mounting parts to connect two fantastic designs together, See my pictures above The 220mm Flower shaped Pinwheel with ball bearing by DonKracho on Thingiverse: https://www.thingiverse.com/thing:4216400 and the Rotating Leaves for Pinwheels by DonKracho on Thingiverse: https://www.thingiverse.com/thing:4278995 Under both designs above I could not find any mountings to connect it in the way I wanted it to be. Thats why I have designed the 3 parts below 1. SHW-Leafes Mount straight.stl to place below the "BallBearingCenter.stl" of the rotating leafes and to connect with a M4x40 screw with one of the following 2 Spindel versions. The 3 leafes needs to be glued then around into the BallBearingCenter circle. 2. SHW-Spindel Leafes-V1.stl in case you just want to build a pure leafes wind wheel. 3. SHW-Spindel-FlowerLeafes-V2.stl in case you want to combine both builds, the flower and the leafes as one build, like I did. Remark: Both Spindel versions have a M4 threaded whole included for an M4x40 mm screw to connect the Spindel with the straight mount through the ball bearing. The V2 also has a threaded whole on top to be able to screw in the threaded rod M8 x150 mm The threaded rod can also be longer if wanted but not shorter then 150 mm to avoid any contact with the flower wheel above by rotation. If you combine both designs, you also need a Threaded rod M8x150 mm or longer to combine the Spindel-FlowerLeafes-V2 with the "AngleMount.stl "of the Flower shaped Pinwheel. I have added also two All in One files in case you have a perfect adjusted print bed. One is for the Pure leafes wheel V1 and the other for the combination with the flower wheel V2. For the flower design you need to download all parts from the original https://www.thingiverse.com/thing:4216400 This design is very big and on Ender 3 Pro you need to extend the bed dimension to 235x235 mm and I could do it only with 3 mm rim and the design needs to be placed exactly into the middle of the bed. !! Ensure that your printing bed is realy 235 x 235 mm and your printer can handle it !! Enjoy printing and if you like it you can post me a make of your final wheel. A short video how it works can be found under following link. https://youtu.be/Bv72OSUDD_k
Statistics
Likes
17
Downloads
0