Battery Box enclosure for lithium polymer cell packs
Description
A large battery box that is stackable for holding lithium polymer cell packs on electric mountainboards. The infill is okay at 15% but for structure use 20-25% for density. Also, ensure the printbed is covered by a thin layer of glue from a gluestick to ensure adherence of the bolt hole areas that tend to curl or move as they are small. User Aligned Rectilinear infill pattern to ensure rigidity as well as save a massive amount of time and filament.. Note: Disable the skirt if your printbed is 210mm wide as the skirt will cause a print GCode error.
Statistics
Likes
0
Downloads
0