TKSpezi frame. A mixed TPU/PETG print
Description
Full credit to Kevin for his Frame: https://www.thingiverse.com/thing:4686544 --------------------------------------------------- This is a remixed version. - added middle struts - removed motor protections - new PETG/TPU Canopy runcam nano 3 (Jellofree) ---> https://www.thingiverse.com/thing:4857197 - lipo slot pressfit 1s 450 mah ---> https://www.thingiverse.com/thing:4855742 I made this remix because I wanted a more durable frame. PETG prints break quickly and other exotic filaments are too expensive and I also don't want to print carbon fiber at home. The addition of the struts has proven a significantly better durability. However, they also affect the airflow. Keep that in mind... i will smooth the edges sometime but this works well for a resolution of 0.10. --------------------------------------------------- TRY SOMETHING NEW: Print this Frame mixed in TPU and PETG ! (https://www.youtube.com/watch?v=-VNzhSDYUxM) start with TPU 65 degree bed 220 degree nozzle 2 Layers before filament change: Increase bed temperature to 100 increase nozzle temperature to 220-225 After tpu is printed: quick switch to PETG start printing PETG around 250-255 degrees (first layers hot as possible) Bed temperature still at 100 and leave it there print slowly with 20-30 mm / s Resolution 0.10 switch to petg after layer 10 You can also try less tpu. Update 16.5.21. This mixed print only works with PETG and high temperatures on bed and nozzle so far. There is no adhesion for pla on TPU (still testing). Also a sandwich (TPU-PETG-TPU) does not work in first tests. But ASA works well too. Stay tuned --------------------------------------------------- My Setup: CrazyBeeXF4 0802 Tiny Whoop 22.000 kv direct soldered 20 AWG BT 2.0 lipo cable Runcam nano 3 gemfan 3blade
Statistics
Likes
7
Downloads
0