Semitrailer adaptor for BRUDER MAN-tipper (Sattelkupplung für MAN-Kipper von Bruder)
Description
It is a subframe with fifth wheel for BRUDER tipper to use a BRUDER semitrailer on it. there are 2 variants (v2 I didn't print ever before) I don't need it, I use only PETG. It was made if you have problems with layer adhesion on the sap in noses. The seat posts are little bit short now, use a brick :) v1: It's on my son's truck, sometimes mounted and de-mounted. 4 screws (M3x10 or M3x12) with nut and washer needed. Possibly you can use also clamps. print: - V1-subframe.stl - fifth-wheel-bracket.stl - fifth-wheel.stl v2: Never tested before, it should be working (write me if you had printed it). 6 screws (M3x10 or M3x12) with nut and washer needed. print: - V2-subframe.stl - fifth-wheel-bracket.stl - fifth-wheel.stl - v2-washer.stl (2x)
Statistics
Likes
2
Downloads
0