Minecraft Creeper lamp
Description
Creeper shaped LED lamp with [shaking head](https://www.youtube.com/watch?v=y_PnrYcluRs). Designed to be printed with 5 colors printer (ie MK3 + MMU2). It can still be printed with less colors by merging parts in the slicer. ### Supplies needed * 12V LED Strip cut to get a load of about 6W: * example: [40cm cut of 5050 LED strip](https://www.amazon.fr/YXH-%C3%A9tanche-flexibles-%C3%89clairage-D%C3%A9coration/dp/B019Q6JVTO/ref=sr_1_8) * 12V Power supply (min 6W) with 5.5 plug. Better with integrated switch: * example: [12v power supply with switch](https://www.amazon.fr/gp/product/B07XQZ8X3Z/ref=ppx_yo_dt_b_asin_title_o01_s00) * Female 5.5 plug for case mount: * example: [Male/Female DC 12 Connectors](https://www.amazon.fr/gp/product/B08NCZBJD4/ref=ppx_yo_dt_b_asin_title_o01_s01) * 20mm diameter spring (length 50mm): * example: [1.2x20x50mm spring](https://www.amazon.fr/gp/product/B07NVDRNXL/ref=ppx_yo_dt_b_asin_title_o01_s01) * 4xM3 screws for body mount: * min thread length: 10 mm * max thread length: 20 mm * 4xM3 screws for door mount: * min thread length: 10 mm * max thread length: 17 mm * The design requires a round shaped head (ie Allen screws) ### Printing * The body+foot part needs supports on the bed, * Every part of the Head must be printed with 100% infill: * We don't want to see the infill pattern through the shaders, * There are some lithophane effects on front part that require this as well, * I used 0.2 mm layer height for head parts and 0.3 mm layer height for everything else but there is no real constraint on this parameter. ### Assembly * Follow the attached photos * For the head, the following points are important: * Head parts are all different and only left and right can be swapped, * Before gluing them do some testing to be sure they fit well. ### Source The source code is a scad file: [agentscad/things/minecraft/creeper-lamp/creeper.scad](https://github.com/GillesBouissac/agentscad/blob/master/things/minecraft/creeper-lamp) Before opening the file you need to install the [Basic Prerequisites](https://github.com/GillesBouissac/agentscad/wiki/Prerequisites) of my library.
Statistics
Likes
16
Downloads
0