Tamiya DT-03 rear suspension mount - printer friendly
Description
Thank you very much @bxd2000 for the initial shock tower! I took the measurements from the STL file and recreated it in Fusion360. Main changes in my version: * everything optimized for 0.4 nozzles - holes with walls next to them create clean wall widths * no supports needed. The countersink holes have a slight chamfer so it prints nicely without any supports Printing it with 3 perimeters and around 50% infill should get you a sturdier part than the original one. You might need a brim to avoid warping.
Statistics
Likes
3
Downloads
0