Filament Guide for aluminum extrusion
Description
A simple offset filament guide that accept an m7 bowden coupler (the one on the stock CR10 bowden extruder works a treat) and is made to mount to 20/20 aluminum extrusion. I use this on my CR10S4 since converting it to direct drive. by using this with a length of ptfe bowden tube I can easily route the filament between my dry box dispenser and the top rail of my printer. Requires: An m7 threaded pneumatic coupler (bowden tube coupler) and 2 each M4 caphead screws and t-nuts.
Statistics
Likes
4
Downloads
0