MPCNC Primo J Optical Endstop Holder
Description
End stop for use with [BIQU Optical Endstops ](https://www.amazon.com/dp/B0721X9VST/?tag=donlrhesch-20) The light blocker will screw into the trucks via the provided tapped holes, these aren't very deep so using an M3x10mm screw only about 1.5mm of thread will bite in, which should be plenty. Clamp piece is closed using an M5x30mm screw and nut, both the M3 and M5 screws are the ones used for the rest of the Primo build.
Statistics
Likes
0
Downloads
0