plug
Description
Hi you all that have broken the trailer plug. Instead of throwing away the brass connectors with a 7mm outer diameter you can reuse them by printing an imitation of XT connector from PLA plastic. Clean the oxidations with sandpaper and be sure to check all pair compatibility / tightness of the brass connectors - tighten by expanding the male part or loosen by squeezing it together. example: the female hole is 5.6 or 5.5 mm >> drill larger 5.5 mm with a drill 5.6 mm is standard Connector is very tight to open. All is done with your own responsibility as with all diy projects. 3-pin modell, for brushless motor. last version long no screw holes, cable joint tin , clean brass oxidation.
Statistics
Likes
1
Downloads
0