Sonicmodell AR 600 Mini Bicam v2
Description
uEagle 2 camera has been discontinued so I redesigned the nose section to acomodate the **Foxeer Nano Toothless 2** FPV camera instead. The companion is still the **Caddx Loris 4k**. The smaller FPV cam made for a longer streamlined nose with a smaller front section leaving additional space for the Loris board. The air inlets are kept for providing the much needed cooling. Loris sits on the left, Toothless2 on the right. You may need the printable cutting stencil and the Loris board stands from the original Aerodynamic Bicam Kit which you can find in my designs. PLA, ABS, PETG, etc are OK but if you live in a hot environment bear in mind the cameras release a lot of heat and PLA starts to loose rigidness at around 60ºC. **Parts List** ------------- 1. **Nose Toothless2 Loris4K:** Place the front side on the bed. layer height: 0,15mm line width 0,42mm walls/top/bottom: 2 infill: 16-25% Rise printing temp 5-10ºC to improve layer adhesion for stronger and more flexible pilars. Weight: ~5gr 2. **Lens Cap Bicam v2** For transport protection of the lenses. _Coming soon_ 3. **Winter Operations Air Inlets v2:** Inlets for reduced airflow. _Coming soon_ 4. **Enjoy!!!**
Statistics
Likes
1
Downloads
0