Model Rocket Kit
Description
A Model Rocket Kit For Estes Bt-55 Body Tubes. Choose From 4 Nose Cones And 3 Fin Sets. Or Take The Solidworks Files And Make Your Own! I Recommend Using A Cardboard Body Tube, But If You Are Determined To Print Your Own Or Want To Try A Multi-Stage Rocket, Check Out This Remix: Https://Www.Thingiverse.Com/Thing:4423394 Based Loosely On The Estes Amazon. Wall Thickness Is 1.6Mm, So Best Printed With A 0.4Mm Nozzle. Base_Swept_12.Stl Is An Experimental 1.2Mm Wall Thickness Version. This Rocket Flew Beautifully With Estes D12-5, But It Should Work With Other 24X70Mm Motors Like Estes C11. See The Open Rocket Simulation File. You Can Also Print 2X 18_Mm_Motor_Adapter And Use 18Mm Motors Like Estes C6-3. There'S A Shock Cord Mount Near The Bottom Of Base_*.Stl. If You Mount Your Shock Cord Here, Make Sure It'S Made Of Kevlar Or Some Other Very Heat Resistant Material. Here'S A Video Of The Rocket Blasting Into The Sky In Slow Motion: Https://Www.Youtube.Com/Watch?V=R5Lmzhydy4G
Statistics
Likes
525
Downloads
0