Adapter for Festool to Kärcher (TS55, K120 ....)
Description
This adapter is to fit the original Kärcher vakuum to Festool tools / machines. It is designed to use the locking mechanism of both brands. Reason is that with other designs the hose can get loose and fall off. There is very little restriction in airflow I would say. No hard edges whatsoever. In my case I adapt a Kärcher WD4 premium to Festool KS120 and TS55. But it should work for other models too. This design is not made to use as less material as possible, because the adapter needs some strength. I´m using it since 5 month without issues. Maybe you could reduce the thickness a bit, but I would leave it as it is. I printed it on a Artillery Sidewinder X1 with 210°C Nozzle 70°C Bed 40m/s Sliced via Cura PLA orange from Material 4 Print (I can not recommend M4P, will not buy it again) 0,4mm Nozzle Feel free to upgrade or remix it.
Statistics
Likes
6
Downloads
0