Installation Tool for Wurstwerfer's mashined Ultrasonic Flywheels
Description
This is an installation tool for Wurstwerfer's mashined Ultrasonic Flywheels for brushless motors. I made this for the Stryfe / Rapidstrike Version of the wheels, it might work with the other versions as well. The problem with installing Wurstwerfer's flywheels is that you have two separate parts, which need to be locked down to screw on the nut: The rotor and the flywheel itself. This tool fixes that problem without the risk of damaging the motor. It needs to be inserted through the vent holes of the flywheel where it sits between the spokes of the rotor while not touching coils. It locks both the rotor and the flywheel down by use of one of the levers, which in turn is fixed by the shaft of the other motor when screwing on the nut. You should apply pressure on the tool while screwing, obviously.
Statistics
Likes
1
Downloads
0