Jig Holder for Magswitch MagJig 95
Description
This thing holds a Magswitch MagJig 95 so it can easily be mounted to something else. For my use I mounted two of them to a piece of plywood to make a drill press fence. It could also be used for other jigs on a table saw, router table, bandsaw, etc. There are two versions: (1) the standard size "MagSwitchHolder-MK1.STL" and (2) a version with a slightly larger hole for the Magswitch called "MagSwitchHolder-MK1-extraTolerances.STL". Printing: - I used an adaptive layer height, but it could easily be printed with 0.2 to 0.3mm layers. - 3 top and bottom layers - 4 perimeters (for extra strength) - 25% infill - I used PETG as my garage gets quite hot in the summer Mounting Hardware: - To mount the holder to a jig (plywood in my case) I used #8 screws (4mm) - To mount the MagSwitch MagJig 95 to the holder itself I used #6 screws that were 1" long. (3.5mm x 25mm) Note: I also included the STEP files to aid in modifying the design.
Statistics
Likes
19
Downloads
0